Cricut Explore Air 2 - Front

Using A Cricut For Quilting: Our Best Recommendations

Dislaimer: This post may contain affiliate links.  I might make a small percentage of any products purchased through my links, at no extra cost to you.

Quilting has never been for the faint-hearted, and a lot of people would probably be quilters if they did not have to go through the hassle of cutting fabric. Personally, I avoided quilting until recently when I came across a Cricut machine.

For anyone unfamiliar with the Cricut machine, but more specifically the Cricut Explore Air 2. It is, in my opinion, the ultimate machine you can own right after your quilters kit and a match made in heaven. The Cricut machine is a smart die-cutting machine that uses a variety of accessories and allows you to cut over 100 designs and shapes on many different materials, thus making cutting much easier than previously.

(Side note: Some choose to use other cutting machines, including the Silhouette.  To each her own, however to help you choose you can check this article: Cricut vs. Silhouette.)

A user simply has to place the quilting material they want to cut into the Cricut machine’s sticky mat, load the mat onto the machine, and press Go from which the machine does everything else.

However, that is not all the machine can do for quilters. There are many ways that we shall discuss below that the Cricut machine can be used for quilting.

Adding iron-on fabrics to quilts

A Cricut machine can be used to personalize quilts by adding different iron-on patches and labels onto a user’s quilting projects.

Since the Cricut machine is extremely versatile, it can cut many different kinds of fabric including paper and vinyl and as such quilters can use the machines software to create labels that can be used to create cute finishing touches to their quilts.

Simply load the iron-on fabric, cut it out and then fuse it to whatever quilting project you are working on.

Drawing embroidery designs

Some Cricut machines such as the one mentioned above usually include an accessory slot that can be used to fit various tools of the machine’s adaptive tool kit.

Quilters could, for example, using a washable fabric pen which can be used to mark and draw different designs on to the top of the quilt which will then be reinforced with embroidery thread. Having tried doing this before, I can guarantee that the outcome will blow your mind.

Cutting

Given that the machine is touted as a cutting machine, it would not make sense if the machine could not manage the most important task as far as quilting is concerned. Cricut machines are usually able to cut different fabrics without necessitating a backing.

The sticky mat where the fabric is placed acts as the backing and as such, the machine’s rotary cutting blade can do its job on any fabric. Even those quilters who are into hexagon paper piecing can use the Cricut machine to create and cut the hexagon effortlessly as the shapes are already preloaded onto the machine’s design software. But that’s not all, if you are into appliques, it is possible to perfectly cut applique shapes with so much ease and very little mess.

Cutting applique shapes with a Cricut machine ensures that you get the curves of your shapes just right without them looking wonky.

Drawing stitch lines

Quilting projects are not always gigantic. Some of them, such as quilted hot pads and pouches, are usually small. For the small projects that need topstitching, users can easily do that using the Cricut machine.

As mentioned above, the washable fabric pen can be used to draw lines on the fabric, and a quilter can then effortlessly stitch onto the project. Using the Cricut machine also ensures that the topstitch lines are perfectly spaced and aligned using the alignment tool available in the machine’s software.

Creating mixed media quilts

Similar to the labels and patches, the Cricut machine facilitates the creation of mixed media quilts. Quilters could, for example, include iron-on vinyl to the quilts design for some extra pizazz. For example, in a project, I did recently, I included colored foil iron-on a quilt that had diamonds on it. The foil not only gave my quilt a glittery appearance, but it also gave it a much-needed dimension. When quilting with mixed media, users can choose between changing up the material they use or picking their favorite colors and including them on the quilt.

Creating stencils for fabric

Sometimes, when creating your quilt, you may not be able to cut out a fabric in a manner that you want because of a number of reasons. To deal with this, users can cut stencil designs, which can then be used on their fabric of choice. Doing this opens possibilities for quilters that did not exist before since they do not have to search for the perfect fabric but can instead create it for themselves. Quilters using Cricut machines can effortlessly optimize the creation of custom quilts that are unique and completely different.

Embellishing Your Quilting Experience

Quilters who enjoy experimenting can achieve a lot when using the Cricut machine. This is because, in addition to the machines, Cricut also have several hand tools such as brayers, self-healing mats, rotary cutters and acrylic rulers that quilters can use to achieve the best possible outcome and help them become masters of their trade. A couple of times using Cricut machines and you will notice the major difference in your creations.

Conclusion and Final Thoughts

As previously mentioned, Cricut has revolutionized a lot as far as quilting is concerned. From cutting to customizing, there is always a Cricut machine ready to meet your needs as a quilter. Nevertheless, a Cricut machine that can meet your needs. The Cricut Explore Air 2 that I own, for example, is such a great choice of machine as it can do a lot for me as a quilter and someone who enjoys trying out other different crafting techniques.

Most of the quilting projects I have undertaken are things I would have never in a million years attempted without the Explore Air 2. I enjoy using the Cricut so much for quilting that I have on several occasions stayed up late brainstorming on quilting ideas and projects that I would challenge myself to do, and I hope that you like me will soon be creating those gorgeous quilts that you love but admire from afar.

Stitch A Cat Portrait with Follow The White Bunny!



If any of you guys are stitchers out there, or cat-lovers – or even better, BOTH! – you can trust me when I tell you, you are absolutely going to want to check out my pal Nicole’s new class, Cat Portrait Stitch Guide.

I’m a little teensy bit biased, because I had the pleasure of working with Nicole for the second time on this project, as her copy editor, but I can promise you this is a damn fine class. Nicole’s awesome at furry stitching, as I’m sure you know, and she’s a fantastic teacher. Check it out and stitch up a furry portrait of your own, I guarantee you’ll love it!

Visit Nicole at her website, Follow The White Bunny, over here.

Little Dorrit & Co. Enamel Pin For Sale!

Eeeep! This is something I’ve been thinking about for a long while now and I finally took the plunge: using Little Dorrit & Co. designs on items other than only embroidery patterns. I just think they are super-cute, although I am a teensy bit biased, and I would love to see them make their way a little further into the world.

So I decided to start with an enamel pin, because I’m totally loving this trend (so fun!) and I thought pin-lovers like me might appreciate one that’s a little different – sweet, teensy, and dainty. So I’ve started with one of our popular Shakespeare’s Flowers designs, because they’re so so pretty (if I do say so my damn self). I’m working on a plan for a second pin – any requests? – and I’ve got some other ideas for Little Dorrit & Co. merchandise a-brewin’. Watch out for new items in the coming months!

Our new Primrose enamel pin is available in the shop now, and you can find our Shakespeare’s Flowers embroidery pattern (five designs in one!) right here.

Catch-up: Bee Adventurous Round 3

This is a while back now, but to catch up, here’s my work on Round 3 of the Bee Adventurous journey me and my wonderful beemates have been on together. (Clare’s work in the center; Rebecca’s on the next section around that, with the circle corners; mine around the outside, the strippy diamonds or whatever they should be called.)

This quilt belongs to Clare, who I was lucky enough to meet in person at this year’s Festival of Quilts. Ohmahgosh, is she the most adorable person?!?!? I just wanted to squish her to bits (in a good way)! I was so happy to meet her, it was a definite highlight of this year’s already wonderful show.

Anyway, it was some time ago, but this quilt was a definite challenge for me. And I couldn’t figure out why for ages. It seemed like a perfectly me thing to do, but then I realized two things:

– For whatever reason, I’ve definitely shifted to a more low-volume / minimalist feel with my fabric choices and designs. I know that’s definitely not what Clare wanted in her quilt.

– Even though I love when other people use solids in their work, I was just not accustomed to it! For ages, I couldn’t figure out how to fit them in and make them work with the prints I wanted to include. They just looked all … blank and stuff. I’m clearly used to playing with prints.

But it all worked out pretty great in the end – though I didn’t think so at the time. I only reluctantly sent it along to the next beemate, still partially feeling like I’d made a mess of it and should rip it out and start again. Now I love it very much.

And it really got me out of my comfort zone. I’m including more solids in my sewing, naturally now and not forced – for me, this was the whole point of the bee: stretching my stitchy legs and trying new things. Sounds like such a silly thing, needing practice to include solids? They just didn’t look right to me at first, but now I’m really enjoying them.

You can see the continuing work on this and all the quilts in this bee by checking out the tag #beeadventurousquilts on Instagram!

Retro Christmas Tree Mug Rug – Embroidery Pattern & Tutorial!

YAY! I’m so excited to be taking part in Laura’s Christmas Craft Link-Up today! If you’ve never stopped by Bugs & Fishes, definitely check it out – Laura does such adorable things with felt and is an all-around crafty whiz, her blog is definitely worth adding to your reader!

Today I’m sharing a free embroidery pattern for a retro Christmas tree design. This tree is 100% based on a project from a 1965 issue of Stitchcraft magazine:

I’ve always loved this design, it’s just so very 1950s/60s and I’ve always wanted to do something with it. I can’t take credit for its ridiculous cuteness at all – I just wanted to recreate it in a modern way. The embroidery pattern is what I wanted to share with you all, and it can be used in a zillion projects. I quite like how the original pattern repeated the motif on a table runner, so cute for a vintage-y Christmas dinner, and I have plans to stitch one up for a tree ornament. But today I’ll show you how to turn it into a mug rug – perfect for snuggling up with Christmas treats and a hot chocolate!

RETRO CHRISTMAS TREE MUG RUG TUTORIAL

Finished size: 8.5″ square
1/4″ seams throughout
Press all seams outward (away from embroidery)
Click through to make any photo bigger if needed!

Here’s what you’ll need:

My Retro Chrismtas Tree Pattern, which you can download here.
– Embroidery floss (I used DMC colors Ecru, 353, 955 and 604).
– The standard embroidery tools: hoop, needle, scissors.
– 4 different fabrics – one to stitch on, two to match, and one for the back. This is a good use for scraps – see below for exact sizes needed. (I used prints from Denyse Schmidt’s Florence line, one by Denyse Schmidt for Joann’s and my backing piece is from Bonnie & Camille’s Bliss.)
– Quilt batting, a piece 9-10″ square.
– The standard sewing tools: machine, pins, thread to match your fabrics.
– Curved basting pins and binding clips (optional)

First up, embroidery!

Download the pattern and trace on a piece of fabric at least 6″ square. Use my colors listed above or your own to match the fabric you’ve chosen, and using 4 strands, embroider your tree! I used chain stitch for the tree itself, french knots for the ornaments, satin stitch for the tree’s base and straight stitches for the stars. Now you’re ready to make your mug rug!

Here’s what to cut from your fabrics, starting from the middle and working outward:

– Your finished embroidery, trimmed to 5″ square (take care to make sure your embroidery is nicely centered before cutting!)
– Inner frame: 2 pieces 5″ x 1″ and 2 pieces 6″ x 1″
– Outer frame: 2 pieces 6″ x 1.75″ and 2 pieces 8.5″ x 1.75″
– 2″ strips for binding, totaling about 40″ long. (Not pictured, whoopsy!) – if using a fat quarter, simply cut 2 strips along longer side.
– A square about 9-10″ of backing fabric.

With your first frame pieces, sew the shorter pieces to the top and bottom of your embroidery, press seams away from embroidery, then sew the longer pieces to the sides. Repeat for the outer frame pieces.

Now your mug rug top is finished! Wasn’t that easy?! If you’ve ever made a quilt or even another mug rug, the rest is all just standard quilting assembly: quilt sandwich, baste, quilt, bind, done! If not, here’s how to put your mug rug together:

Make yourself a quilt sandwich by laying your backing (right side down) on a flat surface, then the batting piece over that (smoothing everything as needed) and then your embroidered top on, well, top (right side up). Secure the layers with curved basting pins every couple of inches (or just long sewing pins or you can even baste by hand) and quilt as desired.

As you can see in the finished photos, I used a longer stitch and quilted a line just inside the embroidered area, then on either side of the outer frame seam. Trim the excess backing and batting away so that your edges are nice and neat.

Now we’ll make binding. Sew your binding strips all together, end to end to make up at least 38″ total, in one long strip. Press seams open. Press in half along length with right sides together so you now have a long folded strip. Pin around edges of front of mug rug with raw edges aligned. When you reach corners, fold the binding strip away from the mug rug, then back over itself to continue along next side:

Continue around all four sides. If one of your binding seams lands on a corner, unpin and start over. It’s a pain in the bottom, but I promise it’ll be worse later if you don’t. When you reach the beginning, fold both ends so that they meet at folds and finger-press.

Sew together at this crease, press seams open, then trim excess to a 1/4″ seam. Binding is sewn each side separately; starting in the middle of one side, sew to 1/4″ from end (i.e., not over fold), then remove from machine. Backstitch at beginning and end of each line to secure.

To start the remaining sides, fold corner flap out of the way (shown above) and sew from top of side to 1/4″ from bottom. Repeat all the way around until you get back to where you started. Now fold binding around to the back of your mug rug (secure with binding clips or hair clips or bobby pins or just regular sewing pins!) and ladder stitch in place by hand, folding corners one side over the other to make neat points. (I’m sorry, I hand-stitched my binding on autopilot and forgot a photo! It’ll be obvious what to do, I swear.)

And that’s it! Now just make some Christmas cookies and wait for Santa to arrive!